Parth Equipments Tube Straightening MachineFor Ferrous & Non Ferrous Metals.
Parth Equipments Over 100 installations in lndia & abroad
Parth Equipments
Emphasis on : Material selection
  : Manufacturing process selection
  : Dimensional & geometrical accuracy
Parth Equipments 3 x 3 skew roll design to achieve 1 in 1500 straightness
Parth Equipments 5 x 5 skew roll design to achieve 1 in 3500 straightness
Parth Equipments M.S. Fabricated & duly stress relieved top & bottom main frames
Parth Equipments All the guiding holes in main frames for roll brackets & supporting columns machined in single setting
Parth Equipments Single piece integrated roll bracket design
Parth Equipments Rolls supported on two matched pair taper roller bearings on each side
 
Straightening machine for tube in coil form
 
Parth Equipments Double Plane (X-Y) Type Straightening Machine For 4 mm to 25 mm Tube OD
Parth Equipments Centrifugal Action Type Straightening Machine For Capillary Tubes & Up to 12.7mm Tube OD
 
 
Tube Straightening Machine
 
Model Name Tube Size Range* Tube Thickness
Min O.D. Max O.D. Max.
PARTH 15 ST 4 16 2.5
PARTH 25 ST 6 25 3.2
PARTH 25 ST-E 6 32 2.4
PARTH 40 ST 8 40 4.0
PARTH 40 ST-E 8 51 3.2
PARTH 50 ST 10 51 5.0
PARTH 50 ST-E 10 65 4.0
PARTH 75 ST 15 76 6.0
PARTH 75 ST-E 15 90 4.5
PARTH 90 ST 20 90 8.0
PARTH 90 ST-E 20 115 6.0
PARTH 115 ST 25 115 10.0
PARTH 11 5 ST-E 25 141 7.0
PARTH 170 ST 50 168 12.0
PARTH 170 ST-E 50 219 8.0
PARTH 220 ST 60 219 20.0
PARTH 220 ST-E 60 273 14.0
 
 
Back to All Tube Mill Back to Top